Harry Bertoia "Diamond" Lounge Chair for Knoll, USA, 1980s
About the Item
- Creator:Knoll (Manufacturer),Harry Bertoia (Designer)
- Design:
- Dimensions:Height: 29.53 in (75 cm)Width: 33.08 in (84 cm)Depth: 30.71 in (78 cm)Seat Height: 16.54 in (42 cm)
- Style:Mid-Century Modern (Of the Period)
- Materials and Techniques:
- Place of Origin:
- Period:
- Date of Manufacture:1980-1989
- Condition:Wear consistent with age and use.
- Seller Location:Hellouw, NL
- Reference Number:1stDibs: LU5583233342692
Diamond Chair
To fully understand the design of Harry Bertoia’s (1915–78) 1952 Diamond chair — an austere and photogenic work of woven steel wire, the intricately sculptural wings of which create the illusion of sitting on air — it helps to go back to his college days: In 1937, the Italian-born artist and designer, who emigrated to Detroit at age 15, earned a scholarship to Cranbrook Academy of Art, the illustrious Michigan design school that attracted such luminaries as Florence Knoll, Eero Saarinen and Charles and Ray Eames. Bertoia was deeply influenced by the Eameses, especially by the sculptural quality that was so prominent in the furniture they made. In the 1940s, he left Cranbrook to work for the couple, developing the molded plywood furniture that would become a trademark of their designs.
Bertoia learned to weld while employed by the Eameses, but left their workshop in anger over the lack of credit he received for the important contributions he made there — a dispute that would come to play an important role in the Diamond chair’s development. He eventually took a job at an electronics lab, where he analyzed human mobility for the purpose of designing electronics with easy-to-reach knobs and consoles.
When his former Cranbrook classmate Florence Knoll tapped Bertoia to make furniture for the Pennsylvania company she had recently founded with her husband, Hans, the designer was swayed with the promise of full credit for designs he produced. Armed with a newly minted background in ergonomics as well as the knowledge he gathered from experimentation with the Eameses, Bertoia capably applied what he’d learned over the years at Knoll, where he utilized thin wires of welded metal to produce pieces that appeared to be floating in the wind — yet remained surprisingly comfortable and supportive. The Diamond chair, a widely revered component of the innovative metal furniture line that Bertoia designed at the company, has been in continuous production at Knoll since 1952 and is available in four finishes today.
Harry Bertoia
Sculptor, furniture and jewelry designer, graphic artist and metalsmith, Harry Bertoia was one of the great cross-disciplinarians of 20th-century art and design and a central figure in American mid-century modernism. Among furniture aficionados, Bertoia is known for his chairs such as the wire-lattice Diamond chair (and its variants such as the tall-backed Bird chair) designed for Knoll Inc. and first released in 1952.
As an artist, he is revered for a style that was his alone. Bertoia’s metal sculptures are by turns expressive and austere, powerful and subtle, intimate in scale and monumental. All embody a tension between the intricacy and precision of Bertoia’s forms and the raw strength of his materials: steel, brass, bronze and copper.
Fortune seemed to guide Bertoia’s artistic development. Born in northeastern Italy, Bertoia immigrated to the United States at age 15, joining an older brother in Detroit. He studied drawing and metalworking in the gifted student program at Cass Technical High School. Recognition led to awards that culminated, in 1937, in a teaching scholarship to attend the Cranbrook Academy of Art in suburban Bloomfield Hills, one of the great crucibles of modernism in America.
At Cranbrook, Bertoia made friendships — with architect Eero Saarinen, designers Charles and Ray Eames and Florence Schust Knoll and others — that shaped the course of his life. He taught metalworking at the school, and when materials rationing during World War II limited the availability of metals, Bertoia focused on jewelry design. He also experimented with monotype printmaking, and 19 of his earliest efforts were bought by the Guggenheim Museum.
In 1943, he left Cranbrook to work in California with the Eameses, helping them develop their now-famed plywood furniture. (Bertoia received scant credit.) Late in that decade, Florence and Hans Knoll persuaded him to move east and join Knoll Inc. His chairs became and remain perennial bestsellers. Royalties allowed Bertoia to devote himself full-time to metal sculpture, a medium he began to explore in earnest in 1947.
By the early 1950s Bertoia was receiving commissions for large-scale works from architects — the first came via Saarinen — as he refined his aesthetic vocabulary into two distinct skeins. One comprises his “sounding sculptures” — gongs and “Sonambient” groupings of rods that strike together and chime when touched by hand or by the wind. The other genre encompasses Bertoia’s naturalistic works: abstract sculptures that suggest bushes, flower petals, leaves, dandelions or sprays of grass.
As you will see on these pages, Harry Bertoia was truly unique; his art and designs manifest a wholly singular combination of delicacy and strength.
Find vintage Harry Bertoia sculptures, armchairs, benches and other furniture and art on 1stDibs.
- ShippingRetrieving quote...Ships From: Haaften, Netherlands
- Return PolicyA return for this item may be initiated within 14 days of delivery.
- Leather Lounge Chair 'Lou Read' by Philippe Starck for DriadeBy Philippe Starck, DriadeLocated in Hellouw, NLLeather lounge chair 'Lou Read' for Driade. This iconic armchair is designed by Philippe Starck and Eugenio Quitllet. This model is designed for the Monceau H...Category
2010s French Modern Chairs
MaterialsMetal
- Model 2254 Lounge Chair by Børge Mogensen for Fredericia Stolefabrik, 1960sBy Børge Mogensen, FredericiaLocated in Hellouw, NLAmazing lounge chair model BM-2254 Slædestolen designed by Børge Mogensen for Fredericia Stolefabrik, 1960s. This chair is adjustable in two different positions as can be seen on the...Category
Vintage 1950s Danish Scandinavian Modern Chairs
MaterialsFabric, Oak
- Set of Four Italian Vintage Lounge Chairs, 1970sLocated in Hellouw, NLSet of Four Italian Vintage Lounge Chairs from the 1970s. These chairs have a simple, yet elegant design and two cushions in off-white shiny fabric. The legs are cone-shaped and the ...Category
Vintage 1970s Italian Mid-Century Modern Lounge Chairs
MaterialsFabric, Wood
- Dutch Lounge Chairs in Beech and Vermillion Upholstery Attr. to Groenekan 1950sBy Gerard van de GroenekanLocated in Hellouw, NLThe design of these lounge chairs is very distinct and seduces us to look beyond that at first glance. The story goes that these chairs were made to order by Gerard van de Groenekan....Category
Vintage 1950s Dutch Mid-Century Modern Lounge Chairs
MaterialsUpholstery, Beech
- Peter Maly 'Zyklus Arm Chair' for Cor, Germany 1980sBy Peter Maly, CORLocated in Hellouw, NLPostmodern Pop Art 'Zyklus Chair' by Peter Maly for Cor, Germany 1980s. This leather lounge chair has a great design and is very comfortable. The base con...Category
Vintage 1980s German Post-Modern Armchairs
MaterialsSteel
- Congo Chair in Birch by Ilmari Tapiovaara for Asko, Finland, 1960sBy Ilmari TapiovaaraLocated in Hellouw, NLNice Congo chair in Birch by Ilmari Tapiovaara for Asko 1960s. This smart construction consists of two parts that are put together without any screws and can be easily shipped or sto...Category
Vintage 1960s Finnish Scandinavian Modern Lounge Chairs
MaterialsBirch
- Harry Bertoia for Knoll International Bird Chair and OttomanBy Harry Bertoia, KnollLocated in Houston, TXHarry Bertoia for Knoll International bird chair and ottoman. This iconic lounge chair and ottoman were originally designed by Harry Bertoia in 1952 and manufactured by Knoll Interna...Category
Vintage 1970s Italian Mid-Century Modern Lounge Chairs
MaterialsSteel
- Harry Bertoia for Knoll Wide White Diamond Chair & Ottoman with Pink UpholsteryBy Harry Bertoia, KnollLocated in St. Louis, MOMid-Century Modern Harry Bertoia for Knoll wide version diamond chair with ottoman, frames are original white paint an original but faded pink Knoll textile covers. Minor scuffs to f...Category
Vintage 1960s American Mid-Century Modern Lounge Chairs
MaterialsSteel
- Harry Bertoia for Knoll Vintage Bird Lounge ChairBy Harry Bertoia, KnollLocated in Saint Louis, USHarry Bertoia for Knoll International bird chair. This iconic lounge chair and ottoman were originally designed by Harry Bertoia in 1952 and manufactured by Knoll International. Each...Category
Vintage 1960s American Mid-Century Modern Lounge Chairs
MaterialsMetal
- Harry Bertoia “Big Diamond” Chair for Knoll International, USA 1960By Knoll, Harry BertoiaLocated in Amsterdam, NLAn impressive lounge chair designed by Harry Bertoia, manufactured by Knoll International in the USA around 1970. This iconic piece is named the “Big Diamond”, after the bent diamon...Category
Vintage 1960s American Lounge Chairs
MaterialsMetal
- Vintage Ergonomic Harry Bertoia Lounge Bird Chair for KnollBy Harry Bertoia, KnollLocated in Antwerp, BEOriginal Vintage Harry Bertoia Bird chair for Knoll 1960s with an original Knoll fabric flame red slip cover on a metal white and black coated frame.The High Wingback chair is in ori...Category
Vintage 1960s German Mid-Century Modern Lounge Chairs
MaterialsMetal, Wire
- Harry Bertoia for Knoll ”BIRD” ChairBy Harry Bertoia, KnollLocated in Philadelphia, PAHarry Bertoia Bird Frame or High Back Diamond. Black metal frame with 4 rubber bushings that let that chair rock slightly. Newer Knoll cover in the last 10-15 years. Cover is very...Category
Vintage 1960s American Mid-Century Modern Lounge Chairs
MaterialsMetal